< ALL Lifting trolleys and Stackers

GM-Panels 120 | Panel Stacker Lifting trolleys and Stackers

GM-Panels 120 – Lifting Trolleys for Panels weighing up to 120 kg

The GM-Panel 120 Lifting Trolleys range for panels is the ideal mobile solution for picking up, rotating, turning and tilting wooden, plastic metal panels effortlessly.
GM-Panels enables panels to be moved indoors and outdoors over long distances thanks to its suction cups and an on-board vacuum generator.
These devices guarantee both the safety of the operators and the loads in their entirety.

  • Handling panels with suction cups up to 120 kg
  • Autonomous battery-powered mobile system with integrated motor
  • Rotating, tilting, turning of porous and non-porous panels
See technical details
Make a quote request Contact us Download the documentation
Lifting Trolleys Handling up to 120 kg Handling by suction cup Ideal for handling porous and non-porous panels
Panel tilting trolley
Wooden panel Lifting trolley
Panel Lifting trolley for horizontal saw
Easy moving and lifting of panels by stacker unit
Gerbeur de manutention de panneaux bois
GM-Panels - Loading panels into a truck
GM-Panels - 2 x 180° rotation
Panel handling by stacker for vertical saw
Handling of panels horizontally to pass through doorways
Suction cup lifting device on handling trolley
Rotating a panel thanks to the GM-Panel stackers by Manut-LM
Pick-up of wooden panels under racks by a Lifting Trolleys
Vertical pick-up and drop-off of panels using a Lifting Trolleys
Pick-up and drop-off of flat panels horizontally by Lifting Trolleys
180° turning of panels by Lifting Trolleys
GM-Panels 120
Make a quote request

Technical information

The GM-Panels 120 Panel Stackers are trolleys equipped with a vacuum lifting device for picking up and moving porous or non-porous panels: wood, glazing, plastic, sheet metal, etc.


This device is ideal for moving bulky panels and allows them to be picked up and put down in any position: horizontal, vertical and 360° turning.

 

GM-Panels therefore finds its place in any environment because it can pick up and set down horizontally and vertically to feed saws or store panels on their edges. It should be noted that GM-Panels compact design and structure allow it to pick up and drop off panels under racks up to 1600 mm.

 

A version of GM-Panels with shortened side frames allows the panels to be stacked as close as possible to obstacles: in particular for feeding horizontal saws.

 

With its built-in vacuum generator, its light weight and its compact design allowing it to pass through narrow passages (corridors, doors), GM-Panels is completely autonomous and can be moved around in any environment. Equipped with high-performance batteries, GM-Panels has an autonomy of up to 8 hours.

 

It can therefore be used on site as well as in a joinery workshop, sheet metal workshop or PVC panel manufacturer.

Technical drawing GM-Panels
Gencode
GM Pan120/90-STD
GM Pan120/180-LR-P
GM Pan120/90-STD-P
GM Pan120/180-STD
GM Pan120/180-STD-P
GM Pan120/90-LR
GM Pan120/90-LR-P
GM Pan120/180-LR
Dimensions of stringers - LL x HL (mm)
282 x 85
282 x 85
632 x 85
632 x 85
632 x 85
282 x 85
632 x 85
282 x 85
Autonomy
100 cycles
100 cycles
100 cycles
100 cycles
100 cycles
100 cycles
100 cycles
100 cycles
Type of batteries
2x 12V AGM
2x 12V AGM
2x 12V AGM
2x 12V AGM
2x 12V AGM
2x 12V AGM
2x 12V AGM
2x 12V AGM
Type of controller
Fixed and remote-controlled
Fixed and remote-controlled
Fixed and remote-controlled
Fixed and remote-controlled
Fixed and remote-controlled
Fixed and remote-controlled
Fixed and remote-controlled
Fixed and remote-controlled
Lifting speed
100 mm/s
100 mm/s
100 mm/s
100 mm/s
100 mm/s
100 mm/s
100 mm/s
100 mm/s
Power
Batteries 24V
Batteries 24V
Batteries 24V
Batteries 24V
Batteries 24V
Batteries 24V
Batteries 24V
Batteries 24V
Weight (kg)
250
250
240
240
240
250
240
250
Max lifting height - Z2 (mm)
1600
1600
1600
1600
1600
1600
1600
1600
Wheel diameter front-rear (mm)
85 - 160
85 - 160
85 - 160
85 - 160
85 - 160
85 - 160
85 - 160
85 - 160
Diameter of suction cups (mm)
230
230
230
230
230
230
230
230
MWA (kg)
120
120
120
120
120
120
120
120
Spreader dimensions - L x W x H (mm)
1540 x 1200 x 235 mm
1540 x 1200 x 235 mm
1540 x 1200 x 235 mm
1540 x 1200 x 235 mm
1540 x 1200 x 235 mm
1540 x 1200 x 235 mm
1540 x 1200 x 235 mm
1540 x 1200 x 235 mm
Stacker frame dimensions - X2 x Y2 x Z1 (mm)
2340 x 824 x 2052
1574 x 824 x 2052
1574 x 824 x 2052
1574 x 824 x 2052
2340 x 824 x 2052
1574 x 824 x 2052
2340 x 824 x 2052
2340 x 824 x 2052
Overall stacker dimensions - X1 x Y1 x Z1 (mm)
2682 x 1540 x 2052
2174 x 1540 x 2052
2174 x 1540 x 2052
2174 x 1540 x 2052
2682 x 1540 x 2052
2682 x 1540 x 2052
2174 x 1540 x 2052
2682 x 1540 x 2052
Pivoting angle g/d
80°
80°
80°
80°
80°
80°
80°
80°
Tilting angle of the panel front/back
180°
90°
90°
90°
180°
180°
180°
90°
Max panel dimensions
3200 x 2100 mm
3200 x 2100 mm
3200 x 2100 mm
3200 x 2100 mm
3200 x 2100 mm
3200 x 2100 mm
3200 x 2100 mm
3200 x 2100 mm
Compatible with porous panels ?
Yes
Yes
No
Yes
No
No
Yes
No
Chassis model
Shortened stringers
Shortened stringers
Standard
Standard
Standard
Shortened stringers
Standard
Shortened stringers
Visual indicators
Battery Charge / Vacuum Meter
Battery Charge / Vacuum Meter
Battery Charge / Vacuum Meter
Battery Charge / Vacuum Meter
Battery Charge / Vacuum Meter
Battery Charge / Vacuum Meter
Battery Charge / Vacuum Meter
Battery Charge / Vacuum Meter
French Manufacturer of Vacuum Tube Lifting Solutions
French Manufacturer

Manut-LM is proud to be the #1 French Manufacturer of Vacuum Tube Lifting Solutions!

Over 30 years of experience
A 30+ year experience

Since its creation in 1987, Manut-LM offers top-quality innovative solutions

TAILORED PRODUCTS
Customized products

All Manut-LM products are made to measure to fit our clients needs

Manufacturer with a strong customer relashiship policy
Close to you

Our sales and technical teams are at your complete disposal to answer your needs quickly